thanks for all the great updates with v1.6 patch and 1.6 game data.
I noticed one issue which seems to only appear with the new civilizations.
When I scroll downwards there are horizontal lines that appear on the screen. refer image.
The lines go away when a unit moves over that area or if scroll upwards.
Again its only with the new civs (list below).
Also, the bottom section is out of the boundary, including the map and the description of attack, armor etc is not readably
Please suggest if a fix is needed or a setting change.
4.1 Berbers
4.2 Ethiopians
4.3 Malians
4.4 Portuguese
5 Rise of the Rajas
5.1 Burmese
5.2 Khmer
5.3 Malay
5.4 Vietnamese
6 Last Khans
6.1 Bulgarians
6.2 Cumans
6.3 Lithuanians
6.4 Tatars
7 Lords of the West
7.1 Burgundians
7.2 Sicilians
8 Dawn of the Dukes
8.1 Bohemians
8.2 Poles
For me the error was due to this, it's a message from that thread:
Quote:
This happens when the compatibility patch is reinstalled after the WololoKingdoms converter has run. Go into your Age2HD directory and delete the "compatslp" folder, that will fix it. You will get an error message that the comp patch isn't correctly installed when entering a lobby but that can safely be ignored.
If it's not the case to you, maybe read the rest of the thread in case some other user had to do additional steps.
Thanks for the response, but I did go through the thread, and searched my entire computer for those folders/files and didnt find it.
I guess the main difference is , I am playing Age Of Empire-II The Conquerors. (not the WololoKingdoms DE)
Patch: v1.6R C
Mod: v1.6 Game Data
Is there any way to troubleshoot to find out which file might be causing this.
Edited 16 February 2022 - 10:31 pm by +pablo@voobly
What's your screen size?
I was looking at the interfaces the other day, to make sure we could accomodate the new civilizations DE seems to be working on and found that some very small screens don't work properly. If that's the case, we can create a workaround.
Thank you for the response, my screen size is 15.6 (1920x1080)
Ok, that doesn't make sense, then. When I say a small screen I mean 800x600 and some close values. It must be some file conflicting with the interface files, the way the compatslp folder error I first mentioned.
Do me a favor and compare the Franks and Burgundians interface, technically they should be the same.
Also, let me know if you are using the independent architecture version of the mod (the answer "I don't know what the independent architecture version is" is valid).
Finally, can you copy a list of the visual mods you have installed?
I fixed the issue, thank you for the clue.
I noticed in the in game options that the screen setting was 1280x720 (probably since the time I had an older pc with a smaller resolution). If I changed the resolution to 1280x800 (or higher) the issue was gone.
Thanks a lot again !!!
let me know if you still need the responses to your earlier post ?
I noticed in the in game options that the screen setting was 1280x720 (probably since the time I had an older pc with a smaller resolution). If I changed the resolution to 1280x800 (or higher) the issue was gone.
Actually, that's the behaviour on the small screen I was talking about.
If your screen is 1920x1080, are you using full screen with smaller resolution or window mode?
Yes, thats right, the game starts off in a smaller resolution window box, after I select Civ and start game, the in-game options change the resolution as I mentioned in the above post.
Do you know how can I change the resolution of the game at start ? I wanted to launch locally (outside of voobly) to see if I can change that, But I am unable to figure out which exe Voobly is using to launch it.
[You must login to view link]
[You must login to view link]
[You must login to view link]
thanks for all the great updates with v1.6 patch and 1.6 game data.
I noticed one issue which seems to only appear with the new civilizations.
When I scroll downwards there are horizontal lines that appear on the screen. refer image.
The lines go away when a unit moves over that area or if scroll upwards.
Again its only with the new civs (list below).
Also, the bottom section is out of the boundary, including the map and the description of attack, armor etc is not readably
Please suggest if a fix is needed or a setting change.
4.1 Berbers
4.2 Ethiopians
4.3 Malians
4.4 Portuguese
5 Rise of the Rajas
5.1 Burmese
5.2 Khmer
5.3 Malay
5.4 Vietnamese
6 Last Khans
6.1 Bulgarians
6.2 Cumans
6.3 Lithuanians
6.4 Tatars
7 Lords of the West
7.1 Burgundians
7.2 Sicilians
8 Dawn of the Dukes
8.1 Bohemians
8.2 Poles
https://www.voobly.com/forum/thread/272799/:1246254
I guess the main difference is , I am playing Age Of Empire-II The Conquerors. (not the WololoKingdoms DE)
Patch: v1.6R C
Mod: v1.6 Game Data
Is there any way to troubleshoot to find out which file might be causing this.
I was looking at the interfaces the other day, to make sure we could accomodate the new civilizations DE seems to be working on and found that some very small screens don't work properly. If that's the case, we can create a workaround.
Do me a favor and compare the Franks and Burgundians interface, technically they should be the same.
Also, let me know if you are using the independent architecture version of the mod (the answer "I don't know what the independent architecture version is" is valid).
Finally, can you copy a list of the visual mods you have installed?
I noticed in the in game options that the screen setting was 1280x720 (probably since the time I had an older pc with a smaller resolution). If I changed the resolution to 1280x800 (or higher) the issue was gone.
Thanks a lot again !!!
let me know if you still need the responses to your earlier post ?
If your screen is 1920x1080, are you using full screen with smaller resolution or window mode?
Do you know how can I change the resolution of the game at start ? I wanted to launch locally (outside of voobly) to see if I can change that, But I am unable to figure out which exe Voobly is using to launch it.