Follow this example (How-to-do) article: [You must login to view link]
Using that article add for this Port: 16000 (all Internal & External fields), Protocol type: UDP, Internal Host: Enter your computer LAN::IPV4 Address and Mapping Name: Voobly.
that's it! you all have to on your Router -> Port Forwarding/Mapping.
You don't need Static IP preference for your current LAN Address; as you're connecting via Ethernet Cable only for your Computer. so ignore that, but in case if you'd connect with W/LAN (WiFi) then only you have to assign up for Preferred Static IP (#KB1034).
From your existing Port Forwarding rule, you did wrong setup - Protocol should be UDP only not TCP/UDP so just change that and you're done perfect!
so ok i change that only udp but still have problems and its same.. yes i connect with 1 pc only with cabl not wifi so not need static? but what is problem now i make pictures .. first pictures is just how was before..and i need to write something in voobly nat options..i make that pictures
As I said above you don't required Static IP preference for your LAN address. so, just forgot about it.
Open your Status ► WAN > Network page. and, check your Profile name that matches with your Port Mapping > Interface: INTERNET_R_8_35 - both should be same and exact!
• Send me a snap of your Advanced > Firewall page.
Follow this example (How-to-do) article: [You must login to view link]
Using that article add for this Port: 16000 (all Internal & External fields), Protocol type: UDP, Internal Host: Enter your computer LAN::IPV4 Address and Mapping Name: Voobly.
that's it! you all have to on your Router -> Port Forwarding/Mapping.
From your existing Port Forwarding rule, you did wrong setup - Protocol should be UDP only not
TCP/UDPso just change that and you're done perfect!Open your Status ► WAN > Network page. and, check your Profile name that matches with your Port Mapping > Interface: INTERNET_R_8_35 - both should be same and exact!
• Send me a snap of your Advanced > Firewall page.
I asked your Router Firewall screenshot mate not your Windows. ^
Still after changing your Interface profile, your problem exists then do use different NAT-T Port on your Router and Voobly settings (i.e 27000 UDP).
*Also if you can, Please visit our live technical chat room support: http://www.voobly.com/games/lobby/77
Thread Closed.