Statik IP Manuel Ayarlar


Contents:

Windows XP, Vista, 7, 8 -8.1 ve 10 da LAN ve WAN yerel ip'nizi Nasıl Düzeltebilirsiniz


Bu durum modem/router' ınızdan doğru yerel ip nize port yönlendirmesi yapabilmeniz için önemli ve de gereklidir. Eğer direk olarak uygun bir modeme bağlı iseniz sizin için bu ayarların tekrar yapılması gerekmeyebilir.



Voobly'de Oynamak

Voobly'de oynamanız için
yerel ip adresinize 16000 UDP portunu yönlendirmeniz gerekmektedir.

VOOBLY SİSTEMİNİZDE BULUNAN BÜTÜN GÜVENLİK DUVARI, ANTİVİRÜS VE İNTERNET SECURİTY YAZILIMLARINDAN YETERLİ İZNİ (HARİÇ BIRAKILANLAR LİSTESİNE EKLENMELİ) ALMALIDIR Game and Network Diagnostic


Free set up help can be found here.


[You must login to view link]



Video presentation


Setting up a private ip
Read below for more written detail




DHCP


The dhcp server on the router, distributes private ip's to any connected device. To make sure you get the same ip every time you log on, you can use "IP Reservation". If you can do that, then none of the set up described needs to be done.
You will need to "fix" or reserve the ip unless your pc is the only attached device.

The router ip [192.168.1.1] and the pc ip [192.168.1.115] need to be out side the range of ip's the DHCP can allocate. Simply alter the start ip [shown in screen shot] to exclude them.

[You must login to view link]



Step 1


Find the default gateway and PC private ip


Step 2


Using the information

for XP

Go to start>> settings>> network connections>>open properties on your "local area connection". The connection that you are using on that pc.

For Vista

Click Start>>Control Panel>>Select Network and Internet >> Network and Sharing Center >> Manage network connections>>Right click your local area connection>>open Properties.

For Windows 7 and 8

Go to start>>control panel>>click "view network status and tasks">>click "change adapter settings">>>Right click your local area connection>>open Properties

The "local area connection" you choose depends if you are using wireless or a hard wire connection on your pc




For all versions, high light "internet protocol version4 [tcp/ipv4">> click properties

Tick " use the following ip address" and "use the following dns server addresses"


Now enter the information shown from the black command window "ipconfig/all" in the relevant boxes.



Step 3


Individual router set up's


Now go here : [You must login to view link]
Find your router by name and model number or a similar model. Click it. Now choose the game from the list. Now follow the instructions on how to access and set up the router.
Router default passwords

[You must login to view link]

To play at Voobly


you only need to forward port 16000udp to the fixed private ip of the playing pc and allow Voobly and the game through any PC firewall and anti-virus app.


Remember


After any alteration of a router page , Apply, save and finally Reboot the router.

Also on the router



If you are going to forward the ports and NOT use UPNP, turn it OFF on the router.
If you use UPnP, DO NOT SET ANY GAME PORTS
For Nat games, games at voobly, it should not be necessary to alter the router firewall.
For games not using the Nat feature, by lan/ ip/ off of Voobly you will have to alter the router firewall settings and probably the pc as well

If your router has a "STATE-FULL PACKET INSPECTION" firewall, untick it or configure it. Apply/save
If your router has "BLOCK ANONYMOUS REQUESTS", untick it. Apply/save
On all security applications, ON THE PC, allow the game and VOOBLY to pass through.


UPNP:
UPnP
Game Patches And General Set up Info
Game patches etc
Set up common fire walls

Firewalls
[You must login to view link]

VISTA ULTIMATE/PREMIUM and WINDOWS 7
These have two in-built firewalls. the usual one and one found from start>> search>> advanced firewall


 
1 User(s) are reading this document (in the past 30 minutes)
0 members, 1 guests