Looks like Virtual Server in NAT Forwarding is what we are looking for. Please create a new rule in Virtual Server and take some screenshots again!
I configured this setting the day you told me to forward port of 27000 UDP. I was myself intersted once I realised there is no port forwarding feature. Hence looked into how i should forward a port. So I tried thisz although it does not work.
Well I just turned the pc off. But the diagnostics are like this:
Data routed through port 4204 IN ALL 3 TEST SERVERS
Result:port not forwarded
Warnings found but probably OK
Recommended action: etc
Please delete any other port forwarding / port triggering rule except the one you created for UDP 27000 pointing to the local IP address of your computer. Please also reboot your router, by unplugging and replugging the power cable for 10 seconds.
Please delete any other port forwarding / port triggering rule except the one you created for UDP 27000 pointing to the local IP address of your computer. Please also reboot your router, by unplugging and replugging the power cable for 10 seconds.
I configured this setting the day you told me to forward port of 27000 UDP. I was myself intersted once I realised there is no port forwarding feature. Hence looked into how i should forward a port. So I tried thisz although it does not work.
[You must login to view link]
Then doublecheck, whether 192.168.0.103 is the ip address of your local computer:
Start > Run > cmd > ipconfig
Reset your Windows Defender Firewall:
[You must login to view link]
Data routed through port 4204 IN ALL 3 TEST SERVERS
Result:port not forwarded
Warnings found but probably OK
Recommended action: etc
[You must login to view link]
Set this to 27000.
Did as said, same result: