Hello everybody, I've port forward the port 16000

Sometimes all is ok and network diagnostic says all test passed and displays the following:

Received data from 'server 1' through port 16000 (this is your WAN or router port)
Received data from 'server 2' through port 16000 (this is your WAN or router port)
Received data from 'server 3' through port 16000 (this is your WAN or router port)

Test Result: All test passed

but sometimes I am fp and when I start scan appears the following additional port in the scan, the port 1024

Received data from 'server 1' through port 1024 (this is your WAN or router port)
Received data from 'server 2' through port 1024 (this is your WAN or router port)
Received data from 'server 3' through port 16000 (this is your WAN or router port)

Test Result: Not Forwarded

and I need to restart my modem several times to be in the first situation, should I port forward also the port 1024? Can I avoid the port 1024?

Thanks in advance

hi
make sure the forwarding is using your playing pc private ip. fix using "reservation" on the router dhcp page.

today I set a static ip using windows 10, my router has not the DHCP reservation option, I still have the same problem as before

edit: obviously I put this static IP when I was port forwarding

I have configured all again following the manual, but still having the same problems

hi
are you connecting by dsl or 4g?

i'm almost sure i have dsl, since my modem is connected to the phone network

hi
whats the make and model number of your modem and do you have one or two boxes?

NUCOM R5000UN Movistar Chile, just one box

hi
the nucom shows as a moden and router combined with wireless. below are two links showing a port forward/virtual server set up. check you have set it up correctly, remembering you only need port 16000udp forwarded to your fixed private ip.
[You must login to view link]
[You must login to view link]
i cannt find a english tranlation of the manual

I checked again were scs are attached below, and diagnostic is the following

also I configured the static IP address (192.168.1.69) using windows 10

hi
that looks ok.
you do not need port triggering and its also not correct. not sure why you still dont get consistant 16000 showing. make sure UPnP is off.
apply and save router/modem settings. then try a reboot of it. see if that helps/not.

I have played some games today, with many users were shown FP, but now all people is FP to me. And the diagnostic changed a bit.

Maybe do I have to reinstall voobly?

hi
talk to your isp, looking at the ip it says wireless broadband. do you have any kind of dish/antena?

Hola, al parecer ese router da bastantes problemas, si puedes ve la posibilidad de que te lo cambien por otro.
Dejo este post solo como referencia, para que veas que a varios más les ha dado problemas, no recomiendo que hagas las cosas que dicen ahí (salvo que seas entendido en el tema y bajo tu propia responsabilidad) como actualizaciones de firmware, etc, ya que hay algunas antiguas o que he leído que han dado problemas, como dejarte sin wi-fi, entre otras cosas: [You must login to view link]

Respecto a por que solo ves a algunos fp, probablemente es porque ellos no tienen el puerto abierto. Generalmente la conexión termina en fp cuando ambos lados tienen algún problema.

A todo esto, desde cuando tienes ese problema? es algo nuevo?

no llevo mucho jugando, sólo un par de meses, y este router me lo colocaron un poco antes de empezar a jugar, pues antes mi internet iba aún peor y ni podía jugar